Page Title goes here

short description

 

Main Menu


Smooth Penetrator: Installation Pictorial

 

System contents:
12 inch length of EMT, (2) large washers, (2) sliding compression couplings, (2) plenum rated bushings, a pair of documentation labels, and a package of intumescent putty.
You should use a drill with a level. This will make your Sleeve System look nice and straight!
A 6 inch bit extension for your hole bits works very well. Be wary of what might be in the walls.
You might use one of the washers to mark your hole. Now drill your perfectly straight hole.
Adjust the hardware to allow for equal protrusion on both sides of the wall. Insert the first half of the System in the hole you made. There is no need for any caulk between the sleeve and the wall (behind the washers). Go to the other side ...
On the other side of the wall, install the washer, sliding compression coupling and bushing. While holding the sleeve firmly in the wall, tighten the set screw on the sliding compression coupling. Now you may use the sleeve system as if it were a roller in the firewall, allowing you to pull cables "un-attended ". This is a real time saver!
Tear the intumescent putty supplied with the system in half. You will need to apply an inch thickness to each end. If you do not have enough putty, you may purchase a "Fill Kit". It is an 18 cubic inch stick of putty.
When the cables reach their destination, install an inch thickness of the supplied intumescent fire stop putty. Alpha numerically ID your penetration. Be sure to fill out and apply the labels. Take a picture of your System!

 

 

icon1 icon2 icon3

themed image

Secondary Header:

First Heading or Title

Septermber 16, 1926

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software