Split Sleeve Systems for retrofitting

Split Sleeve

Bulkhead Plate

Violation

Solution

Violation

Solution

Retrofit existing cables that are in violation of a firewall without having to remove the cables! Unique Putty is included with the sleeve, allowing for a 48% cable fill.  Fire stopped and smoke sealed 100% of the time. Made in the USA by Telecomm Installers for Telecomm Installers. Rated to 4 hrs. horizontally & 3 hrs vertically.

Retrofit large penetration violations with  no down time of important systems. Excellent method for  removing and sealing cable tray and other large holes. Configured with multiple 1-2-4 inch holes & slots for unlimited combinations. Made in the USA. 

"Penetrator" Systems for new cable installations.

Used in new horizontal cable penetrations of fire barriers made of  material such as gypsum drywall or block walls. Rated for up to 2 hrs. Unique Intumescent putty is included, allowing for a 48% cable load. Can be used as a roller for pulling cables. Inexpensive, neat, clean. 

Used in new horizontal or vertical cable penetrations for barriers made of concrete for which up to a 4 hr. system is required. The intumescent putty is included. Unique putty allows for a 48% cable load. This is our most robust System.   

Used by Installers to drop cables "inside" a fire rated sheet rock wall where a outlet is to be located. This is the ONLY mechanical sleeve we know of for doing this. Unique Putty is included that allows for (8) Cat 5 cables at 40% cable load. Available in 1" or 2" sizes.

This device is used when penetrating the top plate of a partition wall. This is not a firestop devise, but a unique approach to protecting the cable jackets in the metal top plate of a partition wall. This system installs in the bat of an eye.... No putty required.