sales@uniquefirestop.com

Sales: (877) 960-5018

Search coming soon.

Unique Fire Stop Products Split Sleeve- (2 Hr) Block System

U.L. System No. W-J-3110   F Rating — 2 Hr   T Rating — 0 Hr

(Guide XHEZ   Through-Penetration Firestop Systems)

1.   Wall Assembly — Min 6 in. thick reinforced lightweight or normal weight (100-150 pcf) concrete. Wall may also be constructed of any UL Classified Concrete Blocks*.

See Concrete Blocks (CAZT) category in the Fire Resistance Directory for names of manufacturers.

2.   Cables — Aggregate cross-sectional area of cables in Split Sleeve to be min 8 percent to max 48 percent of the aggregate cross-sectional area of the Split Sleeve. Cables to be rigidly supported on both sides of wall assembly. Any combination of the following types and sizes of cables may be used:

A. Max 200 pair No. 24 AWG (or smaller) copper conductor cable with polyvinyl chloride (PVC) jacketing and insulation.

B.   Max 1/C, 750 kcmil power cable with copper conductors and cross-linked polyethylene (XLPE) jacketing.

C. Max 3/C No. 2/0 AWG (or smaller) aluminum or copper conductor service entrance cable with PVC insulation and jacket.

D. Max 3/C No. 8 AWG (or smaller) nonmetallic sheathed (Romex) cable with copper conductors, PVC insulation and jacket.

E.   Max 7/C No. 12 AWG (or smaller) multiconductor power and control cables with XLPE or PVC insulation and XLPE or PVC jacket.

F.   Max RG59/U (or smaller) coaxial cable with fluorinated ethylene insulation and jacketing.

G. Max 62.5/48 fiber optic cable with PVC insulation and jacketing.

H. Max 4 pair No. 24 AWG (or smaller) copper conductor category 5 with Hylar insulation and jacket.

3.   Firestop System — The firestop system shall consist of the following:

A. Firestop Device* — Threaded steel sleeve halves incorporating split nuts and split washers sized to fit the specific diam of the opening. Device shall be installed around cables in accordance with the accompanying installation instructions. Device provided in nom 1, 2 and 4 in. sizes. Max diam of opening in wall for 1, 2 and 4 in. size devices are 1-1/4, 2-7/16 and 4-1/2 in. respectively.

UNIQUE FIRE STOP PRODUCTS INC — Split Sleeve

B.   Fill, Void or Cavity Material* Putty — Min 1 in. thickness of fill material applied within the Split Sleeve, flush with each end.

UNIQUE FIRE STOP PRODUCTS INC

*Bearing the UL Classification Marking